Description
Features
Protection factors
Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to life or health (IDLH) levels
This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
With a 3M 6000/7500 series half face respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
With a 3M 6000/7800 series Full face respirator: for particles, for airborne concentrations up to 100 x WES
Organic compounds with low vapour pressures (<1.3Pa @ 25 degrees Celsius) in concentrations up to 10 x WES
Ozone up to 10 x WES
Offers relief from acid gases and organic vapours at levels below the WES
Provides protection against: Particulates (P2/P3*), Ozone and Nuisance Level
Acid gas & organic vapours with low vapour pressure
Higher P3 protection factors only achieved with a 3M Full face respirator, otherwise P2 protection level when worn on a 3M Half face respirator
Nuisance Levels are those levels below the Workplace Exposure Standard (WES)
Applications
Common applications/Hazards:
Made from 3M high performance filter media for effective filtration efficiency
Lightweight and provides low breathing resistance
Specifications
Complies with AS/NZS 1716:2012
